Many general public own the Camry, on the other hand indubitable scarce should dab replacing the heater core by themselves. This is a exact complicated step, as you must completely disassemble the van's dashboard to arrive the heating/air conditioning unit. Consult with an Professional aboriginal to confirm exact procedures for your Camry.
Instructions
1. Filter the Camry's engine coolant, using a Disinfected container for reuse. Disconnect the colorless battery cable and wait a minute and a half for the airbag operation to de-energize. Discharge and recover the air conditioner refrigerant.
2. Disconnect air conditioner suction hose and liquid drainpipe, then clamp on the tubes with an SST clamp. (Create persuaded you don't deform the tube). Disconnect the heater core hoses.
Connect the heater core and A/C suction and pressure hoses, lubricating the O-rings with compressor oil.6. Attach the negative battery cable, fill the cooling system and evacuate and recharge the air conditioner. Start up the engine and check for leaks in the system. You'll want a moment adult's relieve to remove the dashboard from the interior.
4. Remove or disconnect all air ducts, the heater blower meeting, lower defroster nozzles, air conditioning radiator assembly. Remove the mode damper servo sub-assembly and Airmix damper servo sub-assembly, then remove the core from the air conditioner assembly.
5. Install the replacement heater core into air conditioner assembly. Reassemble all components of the heating/air conditioning unit, dashboard and dashboard components.3. Disassemble every Element of the dashboard, starting with the steering turn and borderline. Emigration includes the door scuff plates, cowl side trim, console panels and air bags.
