Push-button switches perform many of the equivalent functions as toggle switches.
A push-button switch is a variation on the principles two-position switch. Pushing the Press-stud Testament sincere or speedy the contact depending on which homeland it is currently in. For example, provided the switch polity is on, pushing the Press-stud Testament accessible the contacts causing the Slogan connected to the switch to turn off. You can employ push-button switches for many of the corresponding functions for which you can exercise a two-position toggle switch, however hire concern not to exceed the happening ranking on the switch.
Instructions
1. Strip 1/2 inch of insulation from one bound of the 22-gauge wire. Slide the wire through the open terminal on the switch. Wrap the wire around the terminal. Touch the soldering iron to the terminal. Press the solder into the terminal and allow the solder to wick into the wire strands. Remove the soldering iron and solder. Do not blow on the solder joint. Strip 1/2 inch of insulation from the remaining ends of the wire. Connect one wire to the source voltage. Connect the other end to the load.
Allow the solder to cool. Wrap electrical tape around the exposed terminals.
3. Allow the solder to cool naturally.2. Strip 1/2 inch of insulation from one end of the second 22-gauge wire. Solder the wire to the other terminal.
