Repair a Rusted Rocker Panel
Rocker panels cut a portion of abuse from the course. Rocks and other sharp objects chip and nick the distemper elsewhere from the panels. Mud and bathe move splashed on the rocker panels and into the chipped areas with no remaining emulsion. This creates a breeding ground for rust. Rust under the distemper of rocker panels can activity unnoticed until the rocker panels are completely rotten. Drink in repair a rusted rocker panel before it's further tardy.
Instructions
Sand the area with 200 grit sandpaper to smooth it once again. The rust fix has turned black and can easily be sanded. Spray a thick coat of primer over the area and allow it to dry for 30 minutes.4. Levy masking tape over the surrounding areas that don't entail to be painted.
2. Spray two thick coats of rust place over the rusted nature. Dominance the can six inches from the surface and application thick, still coats. Wait one unabridged hour before handling the area. This prevents the rust from spreading and also bonds the remaining rust together so that it doesn't flake off under the paint, allowing more rust to arrive the sheetmetal beneath the paint.
3.1. Sand the rusted areas with 180 grit sandpaper. Sand until the rust is removed. Provided the rust covers a immense sphere, sand until it has been specious as smooth as imaginable, yet provided some rust even remains.
Paint the area with two thin coats of paint, allowing 15 minutes between each coat for the paint to dry. Apply two thin coats of clear coat paint, waiting 15 minutes between each coat. Remove the surrounding masking tape and paper. Wait a full day before driving the vehicle so rocks don't chip the fresh paint.
