Portray the bumper of your van is normally accessible to conclude whether you gain prior action handling Car whitewash and whether you accomplish the honorable tools. After you retain sanded and settle the first coat of stain on the bumper, you can then alpha applying the moment coat.
Instructions
1. You're ready to continue if the paint does not stick to your finger. If it's still sticky, wait another 5 to 10 minutes and then test it again.3.
2. Check the paint. Before you paint again, place a finger on the bumper of the car. Wait for the basic coat to dry. After you Stop the first coat of bumper colouring, hire a short breach. It takes anywhere from 20 to 40 minutes for first coat to dry.
Use a paint gun to apply the second coat to the bumper. Refill your paint gun if you are running low on the auto paint. Then, take the paint gun and spray the bumper thoroughly. You are going to want to apply a medium coat at this point.
4. Plan to apply the clear coat once the second coat is finished. Perform a quick visual check to make sure that you went over the entire bumper with the second coat. Once you are satisfied, then prepare to apply the clear coat.
