Refinish a motorcar's fiberglass body parts yourself.
Provided your automobile has fiberglass object parts, there is a first-class chance that they Testament extremity refinishing over date. Fiberglass is a lightweight, burly facts, on the contrary eventually it becomes brittle and prone to damage. Dominant damage, such as that caused by a crash should be handled by a acknowledged, nevertheless infant damage (such as a gouge caused by a runaway shopping cart) can be constant from your own garage.
Instructions
1. Grind the sphere encircling the damage with an electric grinder. Grind a inappreciable deeper than the surrounding nature, so that you can sand your patch flush with the vehivle surface and yet keep Sufficiently facts for the patch to retain its force.
2. Sand over the ground area with coarse sandpaper to assure a fine bond between the decrepit and current fiberglass.
3. Intersect elsewhere four pieces of fiberglass mat. They should be the alike shape as the ground area, on the other hand slightly larger so that the edges overlap onto the undamaged plenty of the motorcar.
4. Levy on a duo of rubber gloves provided you obtain not already.
5. Merge a batch of fiberglass resin and its catalyst, succeeding the directions on the bottle. These should be mixed in a disposable bucket: you might be able to receive cured resin gone again, on the contrary you don't wish to risk a container you apperceive you Testament wish to utilize again.
6. Apply masking tape around the edges of the patch to hold it in place and ensure that it doesn't sag as it cures.14. Allow the patch to fully cure. When it has hardened and no longer sticky to the touch, you are ready to move on.
Tap the resin into the fiberglass to fully saturate it and to remove any trapped air bubbles.
8. Add the second piece of fiberglass onto the first, lining up the edges. Saturate the second piece with resin to bond it to the first.
9. Bond the other two pieces of fiberglass, one at a time, in the same way.
10. Lift the fiberglass patch off of the cardboard by working up an edge with a razor blade.
11. Paint a layer of catalyzed resin onto the ground area of the car.
12. Position the patch onto the ground area. Smooth it around any curves or contours.
13. Lay the first piece of fiberglass on a sheet of cardboard, with the others standing by.7. Coat the first piece of fiberglass with catalyzed resin.
15. Remove the masking tape. If some sticks to the patch, don't worry. You can sand it away.
16. Fill in any remaining dips and imperfections with auto body filler. Allow it to dry before moving on.
17.Sand the patch flush with the car body. Begin with a coarse sandpaper, then move gradually to finer and finer grits.
18. Apply fiberglass primer to the refinished area and let it dry.
19. Give the repaired area a final polish with a very fine grit wet/dry sandpaper.
20. Paint the repaired area with automotive paint.
