One of the most characteristic upgrades for many cars that are customized by their owners is the installation of larger wheels and tires, oftentimes all the more larger wheels and tires.4. Remove the lug nuts and then the remove the existing wheel. Slide the new wheel and tire onto the hub. Tighten the lug nuts by hand.
Instructions
1. Park the vehicle on a flat, level surface. Place the vehicle in gear or in park if it is an automatic, and set the emergency brake.
2. Loosen the lug bolts on the existing wheels with the lug wrench. Place the pad of the floor jack under the appropriate jacking point. This will vary depending on the make and model of the vehicle.
3. Lift the vehicle with the jack as high as the jack will go. Slide the jack stand under the vehicle in the appropriate area. Slowly lower the floor jack so that the vehicle lowers onto the jack stand and is safely and securely supported.
Installing a larger revolve and tire box is basically the corresponding as installing a stock-sized circle. On the contrary, provided the advanced revolve is almighty big (For instance, a 22-inch or larger wheel), it may be difficult to lift the vehicle high enough to install the wheel. Accomplish this with an SUV jack that lifts the vehicle higher than a standard jack, with taller jack stands. Lift the vehicle with the floor jack, pull the jack stand out of the way and then lower the vehicle to the ground.
5. Tighten the lug bolts to the appropriate setting with the torque wrench. Most vehicles use a lug bolt torque setting of around 89 ft/lbs but you should check the owner's manual for the appropriate torque setting.
6. Repeat the above steps for the remaining corners of the vehicle, removing and replacing the wheels one at a time.
