Moreover to existence bull looking, exhaust tape can guidance divide the dimensions of heat you finish outlook from the exhaust pipes of your motorcycle. Start wrapping the pipes from the engine side first, adding one of the hose clamps to keep that end of the wrap stuck fairly still.4. Work slowly to wrap the rest of the pipe, making sure not to leave any wrinkles or creases in the tape.
Soak your wrap aboriginal in baptize for approximately 1/2 age.
2. Remove your exhaust. Most people only wrap the exhaust header, leaving the muffler part of the system alone. If you want to do this, make sure you properly disconnect every part of the exhaust system. Leave the exhaust flanges on the engine side of the header pipes.
3. It's very great for hiding the unsightly bluing of your exhaust headers, mainly whether you're running some Category of exhaust upgrade that causes it to break a bit febrile. Installation is evident, however bend gone your tools and your patience.
Instructions
1.Overlap the tape 1/4 inch or more to ensure proper coverage.
5. Finish wrapping the pipe all the way to the end and give the end a a good tightening twist, then add the other end clamp. Let them dry thoroughly and check for tightness.
6. Reinstall the motorcycle's exhaust pipes, making sure that the hose clamps are as tight as you can get them.
