Graco muggy portray Accoutrement provides second childhood of dependable utility.
The Graco column of competent spray guns, used with the association's commercial sultry sprayers, are a commercial painter's boon acquaintance. These high-quality metal spray guns are accessible to function, incomplex to adjust and much easier To cleanse. A infrequent steps Testament grasp a colossal spray gun operating for dotage with minimal problems.
Instructions
1. Depressurize the stuffy sprayer. Pump cleaning solvent wound up the sprayer according to the manufacturer's directions until Disinfected, uncontaminated solvent exits the pump and the spray hose.
2. Unplug the sprayer. Using the adjustable wrench, detach the spray gun from the spray hose. Shake any remaining solvent out of the spray gun with quick, up-and-down wrist movements.
3. Drop this fitting into the small container filled with paint solvent.5. Remove the paint filter from the stock of the paint gun.
Remove the spray tip holder and spray tip from the front end of the paint gun using the adjustable wrench. Immerse these pieces in a small container filled with appropriate paint solvent.4. Using the adjustable wrench, remove the paint hose fitting from the bottom end of the paint spray gun.
With a small, stiff bristle nylon brush, such as an old toothbrush, clean any paint particles or debris from this paint filter. Once the filter is cleaned, immerse the part in the small container of paint solvent.
6. When reassembling the spray gun, squirt one or two drops of Graco spray gun lubricating oil into the stack of the spray gun before inserting the clean paint filter. This oil will lubricate the gun's trigger valve.
