The brake calipers in your Chrysler Sebring crash pad the brake pads. Every period you perform any effort on the wheels of your Sebring, you should research the brake calipers to certify the mounting bolts gain not rusted and the brake edge is securely connected. A damaged brake caliper can agency a lowering in braking performance. For those who posses never done this before, gimmick on this project captivating between one and two hours to filled. You can obtain all the tools and components you desideratum for the activity from your limited Car parts store.
Instructions
1. Slide a vehivle jack underneath the frame castigate of your Sebring. The jack should be slightly off-center, closer to the circle you are carrying away the business on. Uplift the vehicle off the ground. Stir a jack stand underneath the frame of the vehicle abutting to the machine jack. Lower the vehicle so that the Sebring is supported by the jack stand.
2. Loosen and remove the lug bolts on the wheel with a lug wrench. Pull the wheel off the axle and move set it aside.
3. Use a socket wrench to remove the bolts that connect the brake caliper to its bracket. Lift the caliper out of the bracket.
4. Remove the bolt that connects the brake caliper to the brake line and place the open end of the line into a clear container to collect the brake fluid. Carefully separate the brake caliper into its two halves.
5. Raise the vehicle off the jack stand with the jack then lower it to the ground.8. Repeat Steps 1 through 7 for the rest of the calipers.9.
Use an emery cloth to clean away any scratches. Place a new seal onto the piston. Place the seal onto the piston groove and turn the seal in a clockwise direction to attach it to the piston.
7. Place the brake caliper back into its bracket and secure in place with the bolts. Reconnect the brake line. Remount the wheel back onto the Sebring and tighten the lug nuts with the lug nut wrench. Disconnect the wiring from one of the brake pads then pull both brake pads away from the caliper. Use a flat head screwdriver to remove the dust boots from the caliper.6. Use a dry cloth and brake cleaner to clean all of the surfaces of the brake caliper.
Drain the brake fluid from all of the brakes. Locate the brake fluid reservoir underneath the hood. Remove the cap and use a syringe or siphon kit to remove the brake fluid from the reservoir. Pour new brake fluid into the reservoir and reattach the cap. Pump the brake pedal several times to circulate the brake fluid through the brake lines.
