Interchange an Ignition Switch on a 1996 Chevy S10 Pickup
Wait at least 90 seconds before proceeding besides.2. Remove the shroud encompassing the steering edge, using the 1/4-inch ratchet and socket.
1. Pop the hood of the vehicle. Remove the refusal terminal from the battery, using an open-end wrench.The ignition switch on your 1996 Chevrolet S-10 can inspire a portion of application, expressly whether the vehicle has logged a portion of miles. When it malfunctions, you won't be able to begin the vehicle. Happily, replacing the ignition switch with a dissimilar one isn't a besides crucial manner, and can be done in around an generation with some basic tools.
Instructions
Pull it off the wrinkle, by labourer, and place it to the side. Unplug the wiring to the switch, by hand. Verify that the switch is in the "Lock" position, then remove the screws from the switch, using the Torx-head driver; remove the switch from the column.
3. Make sure the replacement switch is in the "Lock" position. Set the replacement switch on the column and tighten it in place, using the factory screws and the Torx-head driver. Reinstall the steering column cover, using the 1/4-inch ratchet and socket, then reattach the negative terminal on the battery, using an open-end wrench.
