Car brake repair is a do-it-yourself task whether you bear the equitable tools and a petite bit of familiarity in motorcar repair. You'll itch an additional twosome of helping hands and big picture to spend approximately half a period putting on a fresh place of brakes. Provided all you devoir is shoes or pads, the occupation takes less lifetime. Glance at on to memorize repair Car repair brakes.
Instructions
1. Secure your vehicle and jack it up. The front two tires must be off the ground in order to remove them and repair the brakes.
2. Remove the tires. Use the jack and lug nut remover that came with your car. Set your lug nuts aside with the tire for easy replacement.
3.6. Bleed the brake line if needed after replacing the tires. Have the person helping you push on the brake pedal inside the car until braking feels normal.
4. Plug the brake line so brake fluid doesn't leak out all over the floor.
5. Install new pads and replace the cylinder. Turn the new brake cylinder as far as it will go by hand and then tighten down the bolts. Purchase the right pads and cylinders at your local auto parts supply store.
Take off the brake cylinder and pads. Use a hydraulic wrench to remove the fittings and then slide the cylinder off. If you have drum brakes you'll need to remove the brake cover and take off the brake shoes.
