Flare rust is a regular adventure when working with metal, and there are assorted colorful reasons why it happens. It occurs when cutting metal with a waterjet, or when coating the surface with a waterborne news. Preventing luminosity rust method stopping it before it has a chance to fix, and that way properly protecting the metal.
Instructions
1. Rub down the steel panel with a blush scuffing pad. This Testament prepare the primer for mechanical adhesion nevertheless again Testament Disinfected off any surface rust on the metal.
2. Dust down the panel using the automotive cleaner/degreaser and the lint-free paper towels. This Testament remove all grease from the panel and establish that the primer can sink into the metal.
3. Exercise the self-etch primer using the spray can.4. Apply the self-etch primer using the spray can in a heavier coat, using the same techniques as in Step 3. Repeat the process for a total of four coats.
Chore horizontally across the panel. For the first off coat, lightly spray on the primer so that it doesn't get too wet, with a 25 percent overlap on each pass. This is the mist coat. The metal is now protected from flash rust.
