Eventually, as your automobile increases in milage, the parts of your engine that rely on fluids to operate Testament aggregate sludge. A capacity flush is a title used to chronicle the mode of cleaning this sludge from the two fluid-using parts of your engine, the cooling step and the transmission manner. Removing the broken down fluid and replacing it with recent fluid Testament accession your van's performance and denouement in a quieter, smoother engine.
Instructions
Transmission System Flush
1. Consult your owner's publication to impel how even transmission fluid your automobile should capture. Extremely, asset elsewhere what is the manufacturer's counselling for the type of fluid to end.
2. Stretch under the transmission, and allot the bleed plug. Bring about confident you keep placed a pan to receive the fluid that Testament come away during the flushing mode. Custom the take stuff to airy the plug.
3. Let the fluid bleed. As it drains, gate the plug and mop it with a damp cloth To cleanse it. Close the drain plug once it has emptied.12. Use a specially designed cooling system flush to clean the system. Put the cleaning agent directly into the reservoir tank. Fill the tank with cold water from a hose, and then replace the caps you removed in the first step.
Encompass a spread out funnel into the opening.
5. Fill the transmission with the late transmission fluid.
6. Disconnect both hoses that connect your transmission to the cooling radiator. Turn on the van, and gaze to good buy the hose that is expelling fluid. This is your work hose. Reattach the other hose.
7. Employment an air compressor to blow air through the supply hose. This will remove any old oil from the transmission hose.
8. Feed an old piece of hose up through the bottom of the engine, and attach it to the valve where the supply hose attaches. Place the other end of the hose into a bucket and turn on the car. The rest of the old fluid will be completely flushed from the system. Replace the supply hose.
Cooling System Flush
9. Find the car's anti-freeze reservoir, and take off the cap. Also, remove the cap from the radiator filler neck.
10. Put a bucket underneath the radiator's drain plug, located just beneath the radiator, to catch the fluid.
11. Open the drain plug, and allow the old fluid to drain into the bucket. Make sure not to let the antifreeze come in contact with your skin. Reinstall the plug when the fluid has drained.4. Frank up the hood of your automobile, and holding absent the transmission dipstick.
13. Turn on your engine, and run your car's heating system until it reaches normal operational temperature.
14. Wait until the engine has cooled, and then remove the two caps again. Remove the drain plug, and drain the whole system again. Reinstall the drain plug.
15. Replace the caps.18. Run the car again with the heaters on high to allow the antifreeze to disperse throughout the system.
17.Refill the reservoir with antifreeze. Consult your user's manual to determine how much to add to the system. Pour it into the reservoir, and add water until the fluid reaches the full line. Fill the reservoir with plain hose water, replace both caps, and then turn on the engine for 15 minutes.16. Let the engine cool, and re-drain the engine one more time. Replace the drain plug.
