Remove an E46 Alternator
The BMW E46 is the time of BMW 3 Series offered from unpunctual 1999 concluded 2006. The coupe and sedan models shared many engineering characteristics, including the alternator meeting. Replacement of the alternator is a straightforward procedure that Testament proceeds approximately an period and a uncommon child's play tools.
Instructions
7. Pull the alternator gone, hitting it with a rubber mallet as all-important. Provided it seems to be stuck, forcefully hit it on interchange sides with the rubber mallet until it wiggles outside Sufficiently for you to pull it elsewhere.8.
Bare the BMW's Timber and remove the plastic casing that sits on top of the battery to disclose the battery housing.
3. Disconnect both the trustworthy and colorless terminals from the battery.
4. Disconnect the energy wire that is attached to the alternator using the 12mm socket wrench.
5. Loosen and remove the bolt that sits at the centre of the alternator using a 17mm socket wrench.
6. Catch the alternator belt's pulley incorporate and pry it off. Remove the bolt underneath it using a 16mm socket wrench.
1. Remove the air box, using a 12mm socket wrench and pliers, by unscrewing the four securing nuts at its sides, which mount it to the engine bay and secure it in area.2.
Slide the inexperienced alternator into field until it fits snugly.
9. Loosen the alternator zone pulley with a 16mm socket wrench and thread the alternator cestuses so it is back on the alternator pulley.
10. Transform the alternator pulley's plastic cap to protect it from corrosion.
11. Reinstall the long bolt that goes into the center of the alternator by using a 17mm socket wrench.
12. Reconnect the power wire to the alternator using a 12mm socket wrench.
13. Reconnect the positive and negative terminals to the battery and reinstall the battery housing's plastic cover.
14. Close the BMW's hood to complete the installation and start your car to ensure that the alternator is functioning correctly.
