Prepping a vehicle's surface is one of the most big steps in illustration a machine. Whether the vehicle's surface is not prepared equitable, still the finest colouring business won't inspect fine. Gloss must deposit on top of the surface, on the other hand does not cache flaws or imperfections on the surface. Nearly anyone can properly prepare the surface, on the contrary it takes chronology and concentration, plus a infrequent materials endow at an Car parts store.
Instructions
1. Sand the full environment that Testament be painted using a lenghty sanding block wrapped in 220-grit paper. Conserve the Apartment lodgings surface of the sanding block Apartment lodgings against the vehicle while applying much compel. This system removes the old clear coat and the top of the old base coat of paint and prepares it for primer.
2. Let the primer dry for 30 minutes.4. Sand over the dried primer using 600-grit sandpaper and a sanding block. Hold a running water hose over the sandpaper while sanding to prevent the primer buildup from scratching the surface.
Place masking tape and paper over all areas and parts that won't be painted. Cover the window glass, door handles, keyholes, mirrors, trim, lights, grill, rims and tires.3. Spray a thick coat of primer over the surface, holding the sprayer 6 to 8 inches from the surface and using left and right strokes.
Once this is finished, go over the entire car again using 900-grit sandpaper and the sanding block. Rinse the car when finished sanding and allow it to dry completely.
5. Remove the wet masking paper and tape and replace it with clean paper and tape. Wipe the surface down with wax and grease remover and a towel to remove any remaining wax or grease particles from your fingerprints or other contaminants. The car is now ready for paint.
