The fog lights in a Toyota Highlander add increased visibility when driving ended storms or areas of substantial fog by casting the glowing at a lower angle than customary headlights. This angle prevents the burnished from diffusing over the mist. Headlights, with their higher angle, in reality chop visibility and coin a hazardous driving post, hence the extremity for fog lights. Provided both of your fog lights drive elsewhere at the twin bout, you probably annex a blown fuse, on the contrary provided one one goes gone, you'll need to install a new one. If you're mechanically apt and have a half hour of Leisure time, you can install a new fog light bulb in your Highlander.
Instructions
1. Climb under the front end of the Highlander with the socket set and replacement fog light bulb. Unclip the fog light wiring connector from the light by hand.
2. Reach behind the front bumper and remove the three bolts holding the fog lamp in place. Climb out from under the Highlander with your socket set and the old bulb. Discard the old fog light bulb.
Bolt the replacement fog light bulb to the bracket using the socket set.
4. Plug the fog light wiring connector into the back of the replacement fog light bulb by hand. Pull the fog light out of the fog light bracket by hand.3. Insert the replacement fog light bulb manually.
