The Honda Accord is not the most performance-oriented vehicle on the mart. To access its performance, install a turbo tools on your Honda Concur. Installing a turbo tools on your Correspond is by far the quickest habit to bring about a leading horsepower and torque accrual. Nevertheless, installing a turbo implements on your Acquiesce is besides one of the quickest ways to author irreversible engine damage whether you are not careful approximately trustworthy aspects of turbocharging, such as Correct tuning and boost charge.
Instructions
1. Remove the turbo tools from its packaging, and assign absent the parts on the floor. Constitute certain all the components are there.
2. Jack up the Agree and community it on jack stands.
3. Disconnect the exhaust cylinder from the exhaust manifold. There Testament typically be two or three bolts holding the exhaust main to the manifold. Remove the bolts that connect the exhaust manifold to the engine block with a ratchet and remove the manifold.
4. Install the turbo onto the recent manifold using the hardware supplied with the apparatus. Be confident to install a gasket between the turbo and the manifold.
5. Connect the exhaust manifold and turbo meeting to the engine with the hardware supplied. Torque the nuts to the torque specification supplied with the turbo kit. Reinstall the oil pan and connect the oil return line from the turbo to the oil pan.8. Install the boost gauge (should have come with the kit) to monitor boost pressure. To do this, route a vacuum line from the vehicle cabin to the engine, and tap into a vacuum source on the intake manifold.
The source will be detailed in the turbo kit, but will typically be at the oil pressure sensor.
7. Remove the oil pan and and take it to a welder who will weld a bung onto it. This will be used for the oil return line. Connect the new exhaust supplied with the turbo kit to the turbocharger, or have a new exhaust fabricated by an exhaust shop.6. Connect the oil feed line supplied in the turbo kit to an oil source on the engine.
9. Flash the engine control module so that it adjusts fuel and ignition timing to compensate for the additional air entering the motor. Failure to follow this step will result in severe engine damage.
Flashing the ECU is accomplished by purchasing a tuner and plugging it into your OBD Diagnostic port and following the steps given by the manufacturer. You can also ship your ECU to the company and they will ship you a flashed ECU.
