Repair the Rear Brakes on a 2005 Dodge Grand Convoy
Deposit jack stands under the axles and lower the vehicle onto the stands.4. Remove the lug nuts and takings the back wheels off.5. Prolonged driving with worn pads can damage the rotors to the mark that they extremely necessitate replacing. You can transform the rear brakes yourself and save the value of a learned brake assignment, provided you carry the binding Accoutrement and tools.
Instructions
1. Grassland the Cart on a Apartment lodgings stretch of ground. Turn off the engine and place the transmission in "lawns." Pop the hood and movement to the front of the vehicle. Lift the hood and remove the crack cylinder cap. The cap sits to the honest of the engine near the back of the engine compartment.
2. Siphon half the brake fluid from the adept cylinder with a turkey baster. Dwelling the cap loosely over the master cylinder to deposit debris from getting into the remaining fluid.
3. Loosen the lug nuts on the rear wheels with the lug wrench. Dwelling the jack under the frame at the back of the Convoy and lift the rear-end of the automobile.The 2005 Dodge Grand Convoy has all-wheel anti-lock CD brakes. The braking step uses CD rotors and brake pads that squeeze those discs during braking. Worn pads Testament scrape against the rotors' surfaces, alerting the Chauffeur that the pads duty replacing.
Remove the two caliper slide pins from the left rear brake with a 10-mm socket and ratchet. The pins are on the inside plane of the caliper. Lift the caliper from the brake meeting and suspend it above the turn hub with a bungee cord. Slide the two brake pads from the caliper. End a Apartment lodgings screwdriver to pry the brake pads' clips whether you can't remove them easily by participation.
6. Grab the rotor on either side and pull it straight from the circle hub. Spray chain lubricant on the back side of the rotor to remove a stuck CD. Disinfected the revolve hub with brake parts cleaner and a wire brush.
7. Remove the fresh brake rotor from its packaging. Disinfected the CD thoroughly with brake cleaner and a cloth towel. Slide the rotor onto the Troop's spin bolts and push it against the spin hub.
8. Area the C-clamp over the caliper wall -- the side of the caliper from which the caliper piston extends. Effort the piston into the side of the caliper with the clamp to conceive time for the original rotor and brake pads. Remove the C-clamp once the piston is fully depressed within the side of the caliper.
9. Slide the latest brake pads onto the sides of the caliper and district the caliper back over the latest rotor. Screw in the caliper pins and tighten them with the 10-mm socket and ratchet. Abode the left rear wheel onto the Caravan's wheel bolts and screw on the lug nuts by hand.
10. Move to the opposite side of the vehicle and repeat steps 5 through 9 to replace the right side rear brakes.
11. Lift the back of the vehicle with the jack and remove the jack stands. Lower the back tires to the ground and tighten the lug nuts with the lug wrench. Move to the engine compartment.
12. Remove the master cylinder cap and place a funnel into the container. Fill the reservoir with DOT-3 brake fluid as needed. Replace the cap and close the caravan's hood.
