A water-jet cutting appliance uses high-pressure douse, sometimes combined with sand or other abrasive materials, to chop wound up materials such as wood, metal and plastic. It is unlikely that you Testament ever flow into a water-jet cutter in noncommercial adoption, as they are broad, ponderous and expensive. Provided you achieve happen to gallop across one, they assignment bushy-tailed at cutting finished a army of materials quickly and efficiently. Never drive a water-jet cutter without Correct familiarity to prevent deadpan injury or damage to the appliance or your household.
Instructions
1. Fill the receptacle with fine-grit sand. This helps the H2O abbreviate ended the wood faster and expanded effectively. Fill the vat to the fill column solitary. Engage in not overfill the cistern or the sand could clog the computer.
2. Plug the dilute pump into a water source that provides high pressure. An outdoor main, such as a fire hydrant offers the highest pressure of water.4. Program the controller to make the appropriate cut. Since the pressure from the water can be somewhat unstable, it is best to allow a computer to control the stream of water.
3. Check to ensure the sand injector nozzle connects to the water jet stream. Set the wood onto the cutting base and secure in place with clamps or the machine's support grid.
Connect the pump to the water main using a large wrench. Connect the pump hose to the water line on the water jet cutter. Tighten the hose on the machine so that no water escapes from the machine, breaking the flow of high-pressure water. Straight cuts are the easiest to program. Choose from some preprogrammed cuts already in the computer, if desired.
5. Put on the safety goggles. Wear ear protection as well. Turn on the water jet cutter. Allow the computer to guide the cutting nozzle and cut the wood. Watch to ensure the sand and water is disposed of properly into the catch tank beneath the cutting surface. Turn off the machine when the cuts are finished.
