The Ford Focus is universal among customizers and installing a van alarm is a precedence. Installing an alarm action on the Ford Focus requires appreciable wiring skills and a halcyon tolerant of machine electronic systems. Regular options to contain during this project are remote exit and capacity window activation with deeper elaborate systems. Installing a basic alarm in the Ford Center takes approximately two hours.
Connect the alarm endowment wire to the confident battery cable and bound it along the firewall to the Chauffeur's side.2. Mount the siren in an airy area in the engine bay of the Focus, facing the engine to limit water contact while driving.
Instructions
1. Glance at the alarm publication carefully and deal in the practical relieve cipher for the alarm handy in the calamity you keep questions. Frank the hood and disconnect the concrete battery cable.Slide the driver's seat all the way back and remove the screws holding the bottom of the steering wheel case in place.
3. Identify the starter wire and attach the start disable relay. Connect the power lock module to the lock relay next to the fuse box. Drill a small hole in the dash for the LED light and snap it into place.
4. Install the shock sensor per the manual's instructions and pull the wires under the dash. Feed the power and siren wires through the firewall and connect them to the alarm control module. Attach the rest of the wires to the alarm module and secure it as far back into the dash as possible. On models prior to 2008 place the control module behind the radio for improved security.
5. Reconnect the positive battery cable and test the alarm. Adjust the sensitivity as necessary and secure any loose wires with zip ties.
