You no distrust retain heard the assist that it is clever to capture apprehension of a dwarf complication with your vehicle before it becomes a larger one. This is principally exactly of the brakes on your van. The brake pads are the any of the brake action that most oftentimes devoir replacing, and happily, it is a engagement anyone can holder and thus prevent the essential for deeper costly repair office following.
Instructions
1. Lawns the motorcar on Apartment lodgings ground. Levy chucks persist both wheels that are on the contrasted stop of the vehicle on which you Testament be working. Administer the hood and remove the cap to the brake fluid reservoir.
2. Jack the vehicle up elevated Sufficiently so that you can remove the wheels. Levy two jack stands, spaced around an Identical distance except Everyone other and Everyone rotate. Remove the lug nuts from the wheel, remove it and set it aside.
3. Take off the bolts that hold the brake caliper in place, and then slide the brake caliper away from the rotor. Remove the clips or bolts that are used to attach the brake pads to the caliper, and remove the brake pads. Save the brake pad that was against the piston of the brake caliper for use in compressing the piston later.
4. Pull the rotor directly away from the wheel hub to remove it. Inspect it for any grooves from metal-to-metal contact with the brake pads or excessive wear and replace it while you are doing this job if necessary.
5.7. Reassemble the pads and the caliper, simply going in reverse of Step 3. Put the cap to the brake fluid reservoir back on.
6. Smear a layer of brake pad lubricant to the back of both of the new brake pads. Make sure the lubricant is applied only to the backs of the pads where they make contact with the caliper assembly, and not on the side that makes contact with the rotor.
Set the brake pad that you saved up against the round face of the piston. Open a C-clamp wide so that it fits around this pad and the back of the caliper assembly. Slowly tighten the clamp, pausing frequently, and the caliper will compress completely. Put the wheels back on and tighten the lug nuts securely. Repeat the entire process for the brakes on the other side of the vehicle to complete the job.
