If you necessitate to access the door speakers or interchange absent the window regulators on your Chevrolet S-10, the first off belongings that you posses to achieve is remove the door panel. This looks daunting; but if you handle it systematically, you can remove the panel in under 15 minutes. In this case, the project vehicle is a 1999 Chevrolet S-10, but the process is similar for other vehicles as well.
Instructions
1. Insert the end of the window regulator clip removal tool between the door panel and the window crank for the manual windows. Push the tool until the clip on the inside of the window crank pops out of the door panel. Then pull off the window crank. Then pull the panel away from the door.
Then use a flat head screwdriver to pull up the trim panel on the inside of the armrest and remove the Phillips head screw from the panel.
3. Insert the trim panel tool between the corner of the door panel and the door itself. Move it side to side to locate the clip in the panel, then place the tool around the clip and leverage the clip out of the door. Repeat this around the door panel until all of the clips are removed.
4. Lift the door panel up by the base to remove it from the window ledge. If you have power windows, pull the power window switch up towards you and unplug the switches from the harness by hand. The clip removal tool is available online or at most auto parts retailers.2. Pull open the interior door handle and remove the screw on the inside using the Phillips head screwdriver.
