The brake calipers bag the front brake pads
The front brake pads in your Dodge Durango longing changing by 80,000 miles. They may extremity changing sooner, whether your Motor lorry endures a piece of insolvable braking. When you modify the front pads, be persuaded to transform all of them at the alike date. Assignment on one brake meeting, and then ploy to the ensuing turn.
Instructions
Removal
1. Lift the Motor lorry's front extent, facilitate it on the jack stand and remove both front wheels. Cause definite the parking brake is applied.
2. Wash off the filled brake assembly using an aerosol brake cleaner. Community a drip pan underneath the meeting to arrest any residue.
3. Depress the caliper's piston by using a C-clamp to push it back into its Muzzle. Remove the cap on the brake masterly cylinder reservoir in the engine before you end this.
4. Disconnect the brake caliper from the CD by removing its two mounting bolts with a wrench. Handle a coat hanger or other enduring wire to hang the caliper by the authority arm so it does not stretch the brake hose.
5. Install the bushings and then the caliper mounting bolts. Tighten the bolts.11. Connect both wheels and lower the truck.
Lubricate them with a multi-purpose grease and install them back into the bracket.
Installation
7. Install the new inner brake pad into the caliper mounting bracket, followed by the outer one. Make sure both pads are fully seated within the bracket.
8. Place the caliper back into position on the mounting bracket.
9. Remove the guide pin bushings from the caliper and lubricate them with a high-temperature grease.
10. Pull the brake pads out of the caliper's mounting bracket, starting with the inner one.6. Remove the anti-rattle clips from the mounting bracket.
Do this once you've changed the brakes on both wheels.
12. Press on the brake pedal multiple times. Do this until you the pedal greets you with firm resistance.
