Brake pads on a machine
It can obtain a four or five hurry transmission, front rotate ride, Chauffeur and passenger airbags, and has an EPA fuel economy between 25-36 mpg.
Instructions
1. Settle your Ford Polestar in "Grounds" and lift up your emergency brake.Whether you hear squeaking, screeching, or grinding noises forthcoming from your Ford Focus 2001, you probably call for to pin money your brakes. This is relatively easily done procedure that you can engage in in your own driveway. The Ford Focus 2001 is a compact vehicle that comes in three styles: hatchback, sedan or estate car. The brakes operation is in agreement on all three styles.The van engine should be off.
2. Involve the jack underneath the vehivle under the lift nature, which is the Chauffeur's front circle nature. You should caress a "lip" of reinforced metal for you to country your jack. Jack the van up by turning the crank in a clockwise direction.
3. Loosen the lug nuts using your tire iron.
4. Remove the tire and lay it down under the car to break a fall in case the jack drops the car.
5. Take off the top bolt on the caliper. The caliper should move away from the rotor. Take off the brake pads.
6. Clamp a C-clamp on the caliper. One side should lay on the back of the caliper and the other end will push against the brake piston.
7. Install the new brake pads on the caliper until it looks secure. The brake pads are made so that you can't install them incorrectly. Move the caliper across the rotor to tighten it.
8. Place the top bolt back on and tighten it.
9. Replace the wheel and wheel nuts.
10. Lower your Ford Focus back to the ground. You are now ready to begin driving it.
