Interchange the muffler on your Suzuki Samurai.
Stand a latest muffler assembly into place and connect the two rubber hangers to the support pins on the muffler assembly. Raise the rear of the muffler assembly and slide the tailpipe and the rear connection of the muffler together. Install a new exhaust clamp on the connection and tighten the nuts with a socket and ratchet. Do not over-tighten the nuts or you will crush the pipe.
Instructions
1. Uplift the front of your Suzuki off the ground with a jack and position a allot of jack stands under the front axle housing to help the vehicle. Adjust certain the jack stands are on a Apartment lodgings, solid surface, then remove the jack from under the Motor lorry.
2. Place the flange at the front of the muffler meeting from under the Motor lorry. Remove the two mounting bolts from the flange using a wrench on one side and a socket and ratchet on the other.
3. Act to the rear of the meeting and set the connexion between the tailpipe and the muffler meeting. Remove the nuts from the exhaust clamp on the main with a socket and ratchet. Remove the clamp from the exhaust drainpipe and discard it.
4. Seperate the muffler meeting from the tailpipe, then remove the muffler from the rubber hangers under the Motor lorry. Lower the muffler to the ground and remove it from under the Motor lorry.
5.The Suzuki Samurai, with its 1.3-liter engine, has a muffler with an integrated front and rear exhaust channel abbreviate. The front runs from the intellect cylinder or exhaust manifold to the muffler protest and the rear from the object to the tailpipe aloof above the rear axle housing. Replacing the muffler requires you to remove indefinite bolts at the front of the transaction and one exhaust clamp. The office can be completed in the driveway Homewards in approximately an time with accepted labourer tools.
6. Position the flange at the front of the muffler assembly against the flange on the front exhaust pipe and install the two retaining bolts. Tighten the bolts with a socket and ratchet on one side and a wrench on the other.
7. Raise the front of the truck off the jack stands with a jack, remove the jack stands from under the truck, then lower it to the ground.
