Gardner conduit benders have need a bit of skill to function effectively.
For most do-it-yourselfers, automatic conduit benders may be besides expensive and extrinsic, by reason of tools coextensive album, or handwriting, benders. Jotter benders from manufacturers comparable Gardner Electrical need some skill to employ correct. The mechanism of bending electrical conduit--hollow tubes wound up which electrical cables run--is not gargantuan, nevertheless conduit is prone to crimping, which renders it counterproductive for running cable.
Instructions
1. Degree the distance from Everyone junction box to the corner where the bend Testament be. Point the distance on the metal conduit. The distance from the basic junction box to the purpose is the "top of the bend." The remaining distance is the "backside of the bend."
2. Stop the "bend distance." This is earnest by the diameter of the conduit, and is necessary to prevent the conduit from crimping during the bending process. The bend distance is marked on the conduit from the corner mark made in step one back toward the start of the top of the bend. The bender is marked so you know which way to insert the conduit.4. Put one foot on the back of the bender and slowly pull the handle back toward you.
Most conduit benders have the standard bend distances inscribed on the tool for simplicity. You can also check with the store where you purchased the conduit.3. Slip the conduit into the manual bender so the fulcrum is aligned with the bend distance mark when you are facing the end of top of the bend.
Pull with a constant force to avoid crimping. Continue bending until the proper angle mark is perpendicular to the ground.
5. Cut the bottom bend segment as needed.
