The transmission pushes competence from the engine to the wheels.
Remove the drainage screw in the backside of the transmission pan to empty the fluid.2. Disconnect the transmission by removing the six bellhousing bolts that connect the transmission to the engine. Lower the transmission on the transmission jack, roll it slowly from under the vehicle and energy it onto a Disinfected, dry workbench.
Up thrust the vehicle. Secure the vehicle with jack stands and compass blocks of wood ultimate the rear wheels. Disconnect the front and rear driveshafts. Brace the transmission with a transmission jack while disconnecting the transfer case and shift linkage.Rebuilding a transmission requires a Disinfected and organised working globe. A garage with a enormous workbench to levy all the pieces and parts is finest by reason of Everyone articulation Testament commitment inspected and cleaned or maybe replaced. Having Sufficiently amplitude to levy everything absent Testament lift deposit you organised throughout the rebuild. The Ford E40D transmission was introduced in 1989 and was Ford's head fully electronic transmission. The E40D is the transmission you Testament gem in most Fords nowadays.
Instructions
1.3. Closest the directions in the repair tome, disassemble the transmission. Inspect the housing for cracks and wear once you have all the pieces removed and laid out on your workbench. Replace the planetary gears, overdrive pinion, forward drums and clutches.
4. Install a shift kit for smoother shifts and no shift overlap. If not installing a shift kit, continue to replace all seals, gaskets, bands, clutches and gears with the new parts from the transmission rebuild kit. Clean all parts not being replaced. If a part looks damaged, don't hesitate to track down a rebuilt or new part to replace it.
5. Install a new torque converter. The torque converter always needs replaced during a rebuild as it gets the most wear and heat while working between the engine and the transmission.
6. Attach the rebuilt transmission to the newly installed torque converter. Reattach the transfer case and linkage to the transmission. Lower the vehicle and fill the transmission with approved automatic transmission fluid per your owner's manual.
