Connects Two Car Batteries
Booster Cables Removed After Adequate Charge
The battery of the nonrunning vehicle normally receives sufficient charge to begin after a few seconds of being connected to the booster cables and second car battery. After the car starts, the booster cables are simply removed one side at a time. Normally, the negative connector is removed from either vehicle first, followed by removal of the positive connector from either vehicle.A booster cable has four metal connections--two on Everyone stop of the cable. Everyone objective is fictional up of a trustworthy and a denying connector. The clear connectors are attached directly to Everyone van's pleasant battery terminal; the cynical connectors are attached directly to a metal surface in Everyone vehivle's engine compartment--a bolt, a metal housing or any metallic constituent of the engine.
Transmits Current From Good Battery to Dead Battery
After the booster cables are connected, the useful battery in the running car transmits electrical current directly into the dead or discharged battery of the nonrunning vehicle. The current flows from the battery directly into the metal connectors of the booster cable and then flows along the booster cables and on into the second battery.
A booster cable is a not difficult Slogan used to jump-start, or recharge, a dead or discharged motorcar battery. Mythical up of thick-gauge electrical cable coated with rubberized insulation, a booster cable transmits electrical in fashion from a aware battery in one automobile directly into a dead battery of another van.
