This dent would not be suited for do-it-yourself repair.
Removing a descendant dent with do-it-yourself methods can be the most inexpensive route for this type of Car damage. For any barn door dents or areas that Testament demand buffing and repainting, you should holding your motorcar to a protest acquire known repair. Do-it-yourself techniques in these situations may effect added harm and be deeper costly than provided you had taken it to a ace in the early deposit.
Instructions
4. Follow the directions on the body filler to fill the drilled hole. Allow filler to dry. Touch-up the filler with the touch-up paint. Make sure not to drill too deeply and puncture anything besides the body of the car.
2. Insert the dent pulling tool provided with the dent repair kit into the drilled hole. Pull the tool towards you to flatten out the dent or pop it out. Take the dent pulling tool out of the hole.
3. Get under the car in the area near dent. Gently pound the dented area smooth with the metalworking hammer from the back.
1. Asset the approximate centre of the dent. Drill a hole here with the electric drill.
