Door Pin Installation on a 1998 Chevy Blazer
Construct firm both the parking brake and the emergency brakes are busy.2. Allot up the jack stand, the milk crates or the buckets adjacent to the Blazer's door. Incorporate the jack stand, milk crates or buckets with an senescent towel or event.
Instructions
1. Field your 1998 Chevy Blazer on a alike surface.Provided the squeaky door on your 1998 Chevy Blazer can't be remedied with lubricant, the door sags, or the door won't disclosed and brisk properly, you must to alternate the hinge pins. The installation course for just out hinge pins is an inexpensive place that can prevent door or entity damage. It's further a quite commonplace procedure most 1998 Chevy Blazers Testament call for performed during their continuance.
3. Backing the 1998 Chevy Blazer door with the jack stand, milk crates or buckets.
4. Analysis to ensure the door hinges are aligned with the vehicle body's hinges so the hinge pins can easily be inserted into the hinges' holes.
5. Place the top hinge pin into its hinge bracket. The upper hinge pin should point up.
6. Place the bottom hinge pin into its hinge bracket. The bottom hinge pin should point down.
7. Secure the top hinge pin into its corresponding hinge with the punch.
8. Secure the bottom hinge pin into its corresponding hinge with the punch.
9. Place the new locking rings onto the grooves located at the hinge pins' tips.
10. Hammer the locking rings so they are secured onto the hinge pins.
