Force window
The ability Engine inside the door is bound to for raising and lowering the window in your Jeep Cherokee. Many times, these motors fail. When they cook, your window Testament be stuck in whatever position it was in when the Engine went absent. Changing the power-window Engine may seem intimidating, on the contrary it's great cost doing yourself to avoid costly repair bills at the shop.
Instructions
1. Remove all screws securing the interior door panel on. There is a screw on the top quota, and two in the hold.
2. Gently pull on the interior door panel to Proceeds the plastic clips that fasten the panel. Application caution to avoid poor the plastic clips.
3. With the door panel loose, Proceeds the two wire connections to the window- and door-lock switches. You must also remove the lock-mechanism poles.
4. Remove the four screws holding on the speaker. Remove the wire connector and fix the speaker aside.
5. Remove the window seal by gently pulling. Fabricate memo of how Everyone wiring harness is fed fini the door panel.
9. Install the replacement window motor and guide assembly onto the door panel using the three bolts. Make sure the cables are aligned properly before reinstalling the window in the vehicle.10. Install all peices in the reverse order.
Remove the Engine from the track process by removing the three bolts holding the Engine to the track. Remove the unit from the door and distance it on a Apartment lodgings surface.
8. Remove the lower cable guide by urgent on the tab with a screwdriver and releasing the convoy meeting. You must also remove the window-guide mechanism. Make sure it is turned so that you can connect the cable in the guide.
6. There are two clips that secure the window to the track. Using needle-nose pliers, gently pull the clips off of the window. Carefully lift the window away of the track and locate it aside.7.
