In 1989, tape players were the blazing ticket and Disc players were very expensive to install in most cars. Pull the glove box and right side of the dash away from the dashboard using your hands.3. Unscrew the screw on the upper left corner of the void left by the glove box using the Phillips-head screwdriver.
Instructions
1. Remove the screws on the lower sprint panel underneath the steering limit using the Phillips-head screwdriver, then remove the unmarried bolt in the backside left corner of the sprint using the 1/4-inch ratchet and socket. Pull the panel off the dashboard and remit it to hang by the hood fastening Proceeds.
2. Unscrew the screw in the backside left corner of the glove box using the Phillips-head screwdriver, and remove the bolt in the lower fair corner of the sprint using the 1/4-inch ratchet and socket. Regulate the glove box and unscrew the three screws at the top of the sprint using the Phillips-head screwdriver. Immediately, though, you can bias a Disc player charming inexpensively, and install it yourself easily extremely. Provided you're looking to upgrade your older Motor lorry with something modern, you can determine it yourself with a imperceptible bit of clock and too infrequent tools. Antecedent, though, you devoir to remove the geriatric stereo.
Remove the lower console section underneath the radio by pushing in the center of the tab on the clip that holds it in place, then pull the panel off the dash.
4. Pull off the climate control knobs using your hands, then use the pick tool to pull off the black bezel around the radio. Behind this panel is a single screw in the lower right corner. Unscrew that using the Phillips-head screwdriver.
5. Pull off the panel around the ignition switch using your hands. Then pull off the plastic panel around the radio using your hands. Disconnect the stereo from the dashboard using the Phillips-head screwdriver and pull the stereo out. Unplug the stereo from the wiring harness using your hands.
