Dodge Ram
The brake lights or cessation lights are lights located inside the taillight housing that warn drivers at the end you that your vehicle is slowing down. The brake lights on a Dodge Ram pickup are seated carry on a cherry lens to enlargement the visibility of the lights. Provided one of your brake light bulbs has burned gone, you should moderate it nowadays. Failure to act so could justification an accident.
Instructions
1. Unhook the ground cable from the bad battery terminal. Launch by loosening the retaining bolt, using a wrench. Then pull the clamp off the terminal.
2. Unscrew the screws that secure the taillight lens to the tail burnished housing using a phillips screwdriver.
Then pull the bulb from the socket.5. Subsume a virgin bulb. Press it into the socket and rotate it 1/8 to 1/4 of a turn to seat the bulb.
3. Pull the taillight lens absent from the taillight housing with your share.4. Remove the brake flash bulb (it Testament be the bulb ultimate the cardinal lens), by urgent it in slightly an twisting it 1/8 to 1/4 of a turn.
6. Slide the ground cable clamp over the contravening battery terminal, and tighten the retaining bolt with a wrench.
7. Obtain an assistant working inside the cab press down on the brake pedal. Probation to study that the new bulb is illuminated.
8. Lift the taillight lens into position on the taillight housing.
9. Screw in the screws that secure the taillight lens to the taillight housing.
