Install Ignition Coils for a 2001 F150
The 2001 Ford F150 uses two types of coil systems, depending upon the mannequin. One type of step has a unmarried coil pack that Everyone Glimmer plug wire is connected to. The other type, called the coil-over plug method, features exclusive coils mounted over Everyone Glimmer plug. The disposal for installing an ignition coil depends upon the engine base. The installation procedure requires sole basic tools and can easily be accomplished by a novice mechanic.
Instructions
Single Coil Model
1. Disconnect the con battery cable with a combination wrench.
2. Place the decrepit ignition coil and disconnect it whether elementary. Disconnect the electrical connector and the Glimmer plug wires from the coil using your fingers to gently remove them.6. Remove the ignition coil mounting bolt with a socket wrench and remove the coil whether essential.7.
Connect the electrical connector to the ignition coil by pushing it on gently. Operate silicone dielectric compound to the inside of Everyone spark plug wire.
4. Include Everyone spark plug wire into the similar terminal on the ignition coil. Connect the detrimental battery cable with a combination wrench. Exit the vehicle to compose persuaded the ignition coil is working properly.
Multiple Coil Models
5. Disconnect the denying battery cable with a combination wrench. Disconnect the ignition coil connector using your fingers to gently pull it off.
Remove the mounting bolts with a socket wrench and remove the decrepit ignition coil from the endeavor nature.3. Install the ignition coil on the mounting bracket. Secure the retaining bolts with a socket wrench.
Install the new ignition coil and secure with the mounting bolt. Tighten the bolt with a socket wrench. Connect the ignition coil connector by pushing it on gently with your fingers.
8. Connect the negative battery cable with a combination wrench and start the vehicle to make sure the new coil works properly.
