The phrase "when the rubber meets the course" takes on virgin sense on a Harley-Davidson motorcycle. There should be arrows marking the correct direction. Find the yellow dot on the tire. This is the marker for the valve stem.
Instructions
Remove the Old Tire
1. Remove the revolve according to manufacturer's instructions. Handle your valve core object to deflate the tire. Remove the valve core.
2. Discontinuity the bead of the tire absent from the rim. Position the spin on the tire-changing stand. Pull the tire as far to one side as practicable. Push the 2 tire Ambition on the contrapositive side cool and clout them into the narrowest any of the rim.
3. Pry the bead over the near column of the rim. Include one of the tire irons between the bead and the rim on the loose side of the tire. Involve another tire iron 3 to 4 inches from the aboriginal and the bead should occupation up over the rim. Detain adding tire irons until the filled side is paper from the rim. Repeat the system to pull the other bead off the rim.
4. Remove the inner tube whether that's on your motorcycle tire. Remove the valve stem provided it's a tubeless tire. Disinfected the valve stem gap and bead environment. It's considerable to remove any rust or rubber pieces. Disinfected the rim.
Install the New Tire
5. Install a latest tube or valve stem depending on tire type. Adoption turn mount fluid to lubricate both beads of the tire. Make sure of the tire rotation direction. Those 2 rubber tires are main safety features that can scrimpy being or decease. It's leading to control excellent tires on your Harley-Davidson at all times. When it's age to spending money them, these tips can aid.
6. Starting with the valve stem push the bottom bead over the rim. Use your hands as much as you can. Carefully pry the remainder over the rim with the tire irons.
7. If this tire has a tube, now is the time to install it. Carefully put a very small amount of air in it to make sure it is not twisted.
8. Repeat the process with the other bead. This time start on the side opposite the valve stem. Make sure the tube is not pinched.
9. Wrap the bead strap around the tire. Tighten it enough to spread the bead. Add air while releasing the bead strap. The beads should seat completely. Make sure the tire and rim are even all the way around. Use a soapy water solution to check for a good seal.
