A Jeep Grand Cherokee is the quintessential luxury sport service vehicle. This SUV from Jeep comes in four-wheel-drive, so you charge to detain choice tread on all four tires. Here's detain your Jeep Grand Cherokee tires running their peak by checking for Correct tread Profundity.
Instructions
Trial the tread at the stop that the tread wear indicator points. It is a shallower plenty of tread that wears thinner than remainder of the tire. When the tread wear indicator wears completely washed-up, it is bit to change the tires.3.
1. Glimpse carefully at the sidewalls of the tires and gem the tread wear communication. This may be a symbol with an arrow, or the subject spelled outside.2.
Obtain a tread wear gauge whether your tire does not own a tread wear message. Include this item into the grove of the tire to check the tread wear at least four times across the width of the tire. Be sure you fully actuate the tread wear gauge. Compare the smallest reading with the minimum required tread depth.
4. Repeat this process on all four tires, and take note of any uneven wear as this may indicate tire alignment problems.
5. Replace any tires that have less than 1/16 of an inch of tread left on them. For the Jeep Grand Cherokee Laredo use size 245/65-17 tires; the Jeep Grand Cherokee Limited uses 245/65-17 tires, the Overland uses 245/60-18 tires and the Jeep Grand Cherokee SRT8 uses 255/45-20 on the front and 285/40-20 on the rear.
