Replacing the starter in a Chevrolet does not retain to be a complicated effort. The starter is a Engine that is used to begin the flywheel when you depart the vehicle. The flywheel in turns sets the crankshaft in flow and that is what makes your Chevrolet lope. When the starter goes gone, the motorcar Testament not begin, and it is duration to lay in a dissimilar one.
Instructions
Remove the Starter
1. Disconnect the battery.
2. Fix the starter sitting by the transmission. Access it by crawling underneath the vehicle.
3. Remove the decided cable off the starter by unscrewing the aficionado on the advertise. The cable Testament slide off.
4. Remove the backside bolt with a socket wrench. In some applications the ground Testament be connected to the backside bolt.
5. Pull the starter loose with your hands. The starter should slide gone of the flywheel assembly.
Install the Starter
6. Place the new starter up in the flywheel assembly.
7. Start the upper and lower bolts. Do not tighten yet. Ensure the ground cable is installed through the bottom bolt.
8. Tighten the bolts snug. Ensure that both top and bottom are tight.
9. Connect the positive wire to the starter solenoid. Tighten the nut with a socket wrench. Start the vehicle to ensure the starter is functioning correctly.
Do not over tighten or you will break the post.10. Connect the battery.11.
