Weather strips are pieces of rubber facts that are used to fill the linings of doors, windows and other joints in your van to prevent excess wind, air drafts, drizzle and other weather elements from getting into the vehivle when it is closed. When a weather strip needs replacing, you Testament enjoy feasible noticed damp Floor-mat, sour odour in the material or carpeting inside the vehivle or you may hear wind filtering on ice cracks or openings between the strips and the vehivle frame or windowsill. Installing Soft Seal Trade-mark weather strips on your convertible top Testament extremely encompass inspecting and replacing senescent weather strips along the windows and door, on account of they are connected to the convertible top.
Instructions
Cause your pliers to start pulling out the antiquated weather stripping. Score underneath the strips using your razor blade to hand remove them completely. Remove any adhesive residue, using the razor blade to gently scrape it off.5. Sketch the arrangement of the ongoing weather stripping, noting these gaps carefully, and haul pictures for time to come reference.
2. Change sorrounding the automobile and roll down the windows. Look the weather stripping in these areas very as they all fit stable and connect to your convertible roof. Obtain the needed installation materials, including the needed Soft Seal strips.
3. Lower the convertible top and establish by working encircling the window casings and releasing any clasps or removing screws as needed to access the installed weather stripping. Grind your system sorrounding the van in a Hand-bill example, starting at the passenger side front door, to stay organised.
4.1. Inscribe down the year, bring about and pattern of your convertible. Stare at the interior and exterior of your convertible roof and memo areas avowed as works gaps, where there is no weather stripping in process.
Spray a releasing agent to remove any remaining adhesive and clean it absent with a cloth. Clean out the releasing agent with a damp towel and then dry with another.
6. Using your sketch as a guide to where the necessary gaps and strips are to be positioned apply a thin layer of the new adhesive or glue to the weather stripping and the window or roof frame section you are working with. Fit the Soft Seal weather strip to the panel and push it into place using your fingers, then use a Popsicle stick to firmly tuck the strip into place and wipe away any residue with a damp cloth. Allow to dry for a half hour.
7. Remove the weather stripping from the convertible canopy. Remove any screws or attachments to access the strips and use your razor and adhesive remover to carefully pull away the old weather stripping. Clean away any adhesive residue, then apply a thin coat of the new adhesive to the replacement strip and the canopy frame and install the new Soft Seal strips.
8. Move to the part of the roof weather stripping that houses the rear glass, if applicable, and carefully remove the fasteners holding the glass secure. Support the glass panel in place and remove the old weather stripping using the same process; then reinstall the new soft strips and wipe away any excess residue. Reinsert the glass and supporting rods.
9. Wash the windows and roof of the car carefully and check for any leakage from incorrectly fitted strips and use the same process to remove and reinstall strips to adjust as needed.
