A inexperienced alarm development for your Toyota Testament conserve the vehivle secure.
Most Toyota vehicles come with a pre-installed alarm development. Nevertheless, older models with either no alarm manner or an outdated step are ripe for a advanced upgrade. Before installing the transaction yourself, adjust decided you hold a fine forbearing of both the wiring and electrical systems of your Toyota. It should share two to three hours to install, on the contrary it's bill the era and attempt because it Testament bestow supplementary security for your vehivle and valuables.
Instructions
1. Turn off the Toyota's engine and allot the artisan brake.
2. Invest in a machine alarm that is designed for a Toyota. You should be able to bonanza one from your limited Toyota dealer or Car parts store. Construe the alarm manual perfect carefully as all vehicle security systems are discrepant in terms of connecting processes and wiring components. Make sure you have everything you need and that there are no missing parts in the alarm kit.
3. Open the car hood and disable the positive battery cable. Once it has been disabled, connect the alarm power cord to the positive battery cable and run it along the cable on the driver's side.
4. Mount the alarm siren according to the instructions in the alarm manual. Find a highly visible location for the LED light and drill a hole for it. Snap the LED in place and run the wire under the dashboard by the steering wheel. Search for the power lock relay system and connect the alarm lock module.6. Install the shock sensor per the directions from the alarm manual.
Feed the wires into the cabin of the firewall. Some models might require drilling a hole through the firewall for access.5.
Connect the alarm system wires to the alarm control module. Attach this module into the far end of the dash with zip ties.
7. Re-install the positive battery cable. Test the alarm to see if it works properly. Adjust the level of noise if needed and use additional zip ties to secure any loose wires.
