Energy windows are a convenience characteristic for lots of vehicles on the path nowadays, and when they oomph elsewhere, it can be dreamboat inconvenient. Repeat this action for the trim sorrounding the interior pull helve and the energy window switch panel. Unplug the dynamism window switch panel, using your hands.2.
Instructions
1. Compass the flathead screwdriver between the lock Press-stud and the door panel, then twist the screwdriver to pop away the door lock trim. Age was, replacing a window regulator was a certain malaise, however on the 1999-2006 Silverado, the means has ripen into a parcel easier. Away, the regulator is on a cable course, and can be pulled away of the door in minutes. In this occasion, the project vehicle is a 2004 Chevrolet Silverado, however the fashion is resembling for other vehicles.
Unbolt the door panel from the door, using the 1/4-inch ratchet and socket establish. The bolts are in the corner near the armrest, and extreme the door lock. Then pull off the interior mirror trim quantity with your hands.
3. Push the door panel up In relation to the headliner, using your hands, and then pull the door panel off of the door.
4. Plug the energy window switch back into the harness on the door and roll down the window to the partly objective. There are two clamps on the window channels that authority the window in district. Unbolt them, using the 3/8-inch ratchet and socket, then tilt the back of the window up In relation to the front of the vehicle and pull the glass elsewhere of the door In relation to the interior, using your hands.
5. Unbolt the bolts that secure the window channels to the door, using the 3/8-inch ratchet and socket. Then unbolt the window regulator Engine from the door. Unplug the power window regulator motor harness from the door too. Fold the channels together so that the channels, cables and window regulator motor can fit through the access panel, and pull out the assembly.
6. Slide the replacement power window assembly into the door panel and bolt it in place, using the 3/8-inch ratchet and socket. Reinstall the glass in the reverse order of removal, and tighten it down to the regulator, using the 3/8-inch ratchet and socket.
7. Plug the wiring harness back into the switch panel and test the window's up and down movement. If it binds in any way, adjust the window, or consider reinstalling the assembly, as the cables may be twisted.
8. Reassemble the door panel in the reverse order of disassembly.
