Repairing and illustration a vehivle can be done by the limited reason purchase distinct hundred to thousands of dollars. Learning discharge this yourself can save you bucks and advise you skills that can be used for many elderliness. Once you notice a sporadic easy techniques, you can full a admirable looking tint labour in one lifetime.
Repair Work
Repair labour starts with grinding gone the distemper down to the naked metal of the motorcar. Sand the primer lightly with a long sanding block and 300 grit sandpaper to locate any low or high areas. Repair these areas and continue.
Painting
Make sure that the surface of the car is very clean before spraying paint. Leaving the dent pushed into the motorcar is slightly more select than having it above the surface.Practice a entity filler, such as Bondo, to the adequate world of the damage. Permit it to dry for 30 minutes and then sand it smooth with 80 grit sandpaper. Once the Bondo area is smooth with the car's surface, use a finer grit of paper (120 grit) to sand over the area. This removes the deep scratches left by the 80 grit paper.
Now the car is ready for primer. After masking off the areas that don't need paint, spray a coat or two of primer on the damaged area. Remove all of the emulsion in and encircling a dent before doing anything else. Beside, manipulate a dent puller to pull the dents gone until the dented environment is flush with the motorcar's surface. Provided that is not doable, impress it as quick as imaginable.
Wipe the car down with wax and grease remover and then go over it with a tack rag. This removes any oils from your skin and any kind of dust or debris from the surface of the car. Even the smallest particles can cause trash in the paint.
When spraying paint onto the car, start at the top of the roof, then move to the hood and trunk and finally the sides. Always paint in horizontal strokes and slightly overlap each stroke for even coverage. Allow at least 30 minutes between each coat of paint.
Finishing the Car
Once the car has been painted and has dried, you can make it shine. Use 800 grit sandpaper and a water hose to sand the car completely. Keep the sandpaper soaking wet while it touches the car. Sand until the car is dull.
Use a buffer and liquid rubbing compound to buff the car, moving in horizontal motions. The car will shine much brighter and clearer than a clear coat of paint alone.
