Buffing turn guarding requirements are stipulated by the Occupational Safety and Health Authority.
Make sure that the end flanges of the buffing wheel are covered by the safety guard. The nut and spindle should also be covered by the guard. However, OSHA regulations do allow for the flange ends to be exposed if the work provides a suitable measure of protection to the operator. These guarding requirements must be adhered to whenever using a buffing rotate tool.
Instructions
1. Test the guard for cracks or other damage. Make sure that the safety guard is affixed to the buffing revolve tool, where viable, and secured gone whether not doable. The guard should not barricade the Employee or be a hazard in itself.
2.Buffing circle machines are commonly used in manufacturing, very as in institute mould and technology departments. The spinning buffing spin is used to polish and remove imperfections from metal products. Since of the rotation velocity of the buffing spin, safety is paramount, and guarding requirements are stipulated by the Occupational Safety and Health Management.
3. Wear protective eye glasses or a face shield whenever using a buffing wheel machine. The velocity of the wheel means small pieces of metal are constantly being flung up at your face. Therefore, it is imperative you guard your eyes at all times when using the buffing wheel machine.
