The Lincoln Navigator is a luxury sport work vehicle (SUV) manufactured and sold by Ford Engine Co. The vehicle comes with a deluxe plant stereo course wired to 14 speakers, including subwoofers, which are low-frequency speakers that deliver bass. If you hog workshop speakers or aftermarket replacement subwoofers, replacing one of these speakers takes exclusive a uncommon minutes whether you chase these steps.
Instructions
3. Pull the subwoofer straight back from the housing so you can see the two connecting wires behind it.4.
2. Unscrew the round subwoofer from its housing using the screwdriver. Set aside the screws in a safe place. You'll need them again Keep a plastic cup handy to hold these small parts.
1. Extract and establish aside the mounting screws of the subwoofer's grille incorporate and remove it. Whether there aren't screws, applicability the Apartment lodgings wrinkle of a screwdriver to pop off the subsume by working the column carefully sorrounding the rim of the grille cover. Standard subwoofers on a Lincoln Navigator are 8 inches in diameter.
Detach the two wires by pulling straight back at the metal clips that slide onto the subwoofer posts. Tape the wires to the side of the mounting enclosure to prevent them from falling back inside the vehicle.
5. Orient the new sub over the mounting hole so that the connections on back are as close as possible to the wires.
6. Clip the wires to the posts on the new sub. The red wire connects to the right terminal and the black wire connects to the left.
7. Place the sub inside the mounting enclosure and secure it with screws.
8. Replace the speaker grille cover and secure with screws or snap back into place.
