A Ford Explorer is the experienced type of vehicle to install an overhead DVD player. It could come with an adapter plug that is just plugged into the cigarette lighter, but it more likely has a cable with three wire leads. Normally, the red wire connects to the starter's electrical harness, the yellow goes to a 12-volt source like the battery and the black is fastened to a metal ground.
1. Choose a spot on the Explorer's ceiling to mount the DVD player to. It is boon to be somewhere that can be viewed by the rear and Centre seats, on the contrary it can't be anywhere where there is a ablaze. Envisage a column haggard down the Centre of the ceiling and pick a spot along that limit.
2. Analysis the Explorer's ceiling and constitute decided there is a metal folio on the headboard. This is needed to securely attach the DVD player's mount. You must install a consubstantial phase into the ceiling provided there isn't one already.
3. Cover a period of metal, plywood or plastic into the ceiling, provided there is no stage within it. Pull off the upholstery to the ceiling--this may demand a spray to remove the adhesive bonding of the framework to the headboard. Cover the page onto the ceiling and operate an adhesive spray to glue the upholstery to the sheet.
4. Attach the DVD player to the ceiling. It will come with mounting screws (possibly built into the mount already) that you will drill into the sheet in the ceiling-be it the sheet already on the headboard or the one you installed.
5. Wire the DVD player's power cables in place. This Slogan can fabricate a elongated Journey in this vehicle easier for the passengers on the back seats. You dispassionate duty to produce decided that there is an epitome exact spot to mount the DVD player on the ceiling and that there is something within the ceiling that the player can mount to. You can't ethical attach it to the upholstery alone or the steel headboard.
