Removing rust is a chore, on the other hand the equitable tools can produce the afafir a quota easier. One of the added aggressive ways to remove rust on a motorcar is with an angle grinder. Using the true combination of discs, you can remove the rust quickly and effectively while doing minimal damage.
Instructions
1. Set the rusted world on the vehicle that you fancy To cleanse.
2. Attach the 80-grit flap CD onto the angle grinder using the tools if with the grinder. This 80-grit CD is quite aggressive and should quickly select off the rust.
3. Lay the safety glasses on your face, as dust and metal may commencement flying ended the air.
4. Sand the rusted area and surrounding area with the 120-grit flap disc. This will polish out some of the heavier scratches left in the metal from the 80-grit, further as get out remainder of the rust.8. Mask off the bare metal on the car using the masking tape and paper.
You don't want to damage the surrounding sheet metal.
6. Replace the 80-grit flap disc with the 120-grit flap disc using the tools provided with the grinder.
7. Turn on the grinder and lightly bow to grind the rust. It Testament birth to kick up the rust and dust quite quickly, so be quite light on the trigger and the grinder so you don't go through the metal.5. Grind the rust until a good portion of it is no longer visible.
9. Spray the spray paint over the bare metal. Use a light coat at first, and then go heavier after the first coat dries. This will protect the car from future rust in that area.
