The Plymouth Voyager Glimmer plugs have need replacement after 60,000 miles.2. Catch the Glimmer plug cables located along the front and back of the Plymouth Voyager engine. Grab the spark plug cable by the larger parcel that covers the heel of the Glimmer plug and turn it 180 degrees in Everyone progression.
Instructions
1. Disconnect the battery cable so the radiator fan does not switch on after you turn the engine off. Confess the engine to refreshing before removing any components connected to the engine.
The Glimmer plugs of the Plymouth Voyager may be located on the firewall side of the engine. Whether this is the dispute, the windscreen wiper meeting needs to be removed before replacing the plugs. Glimmer plugs that are working properly decrease Gauze milage and finance a Disinfected engine. Pull gone on the Glimmer plug wire to disconnect it.
3. Push the socket onto the Glimmer plug and turn the socket wrench so it unscrews the Glimmer plug from the engine. Pull to remove the Glimmer plug from the husky.
4. Spray silicone spray into the cylinder well and coat the threads of the new spark plug with the silicone spray.
5. Insert the new spark plug into the socket with the threaded end protruding.
6. Screw the spark plug into the cylinder well and tighten it with the socket wrench. Test the tension on the spark plug and adjust the tension to the appropriate level listed on the manufacturer's packaging.
7. Attach the boot of the spark plug wire to the end of the spark plug and twist to lock it in place. Repeat the above steps for remainder of the spark plugs.
8. Return any removed components back to their original positions. Reconnect the battery cable.
