Working with a custom automobile wealth that you annex to generate matters fit, one idea or another. One method to chop and seperate two pieces of metal is to employment a high-speed air item saying. It's a pneumatic saying that has a insufficient, narrow blade that allows the user to build tight curves. Using one is not compacted, it blameless takes a inappreciable bit of practice, and in no time you'll be cutting out patterns.
Connect the air body saw to the air compressor via the air hose.3. Place the blade of the air saw onto the metal you want to chop, and pull the trigger using your hands.
An air saw makes a lot of noise and flings out tiny pieces of metal. Without proper protection, you can get injured.
2.
Instructions
1. Wear eye and ear protection, very as gloves.The saw will start to vibrate, but you want to work with the saw, not against it. You can throttle back the trigger if need be, starting the cut slowly then working into it.
4. Turn the saw as you continue to chop the metal. It may occasionally jam up, where the saw stops working suddenly and you hear the air coming out of the bottom of the saw. By working it back and forth, you can make the saw move again.
5. Pull out the saw blade from the panel and disconnect the tool from the air compressor when you are finished cutting.
