Replacing the starter in your 1999 Nissan Sentra is an elementary modus operandi, and you don't require a quantity of familiarity to determine it. When replacing the starter, pay for a fresh one, not one that has been refurbished. When your starter is going wick, the van Testament not flying start or first step sluggishly. When this happens, it's extent to change it for a advanced one.
Instructions
1. Pull the vehivle into your garage, and turn it off.
2. Remove the jack when the jack stands are in place.5. Use masking tape and markers to mark the position of the electrical wires on the starter. This is so you know reconnect them when you install the new starter.
To do this, loosen the nut, and pull the cable off.
4. Raise the car with the jack, and place jack stands under the car. Assign spin chocks ultimate both rear tires to avoid the risk of the machine Stirring while you are working on it.3. Open the hood, and remove the negative (black) battery cable.
6. Remove the wires by loosening the nuts with a wrench.
7. Remove the bolts holding the starter in place with a ratchet and socket. When the bolts are out, pull the starter from the engine by hand.
8. To replace the starter, follow the removal steps in reverse.
