The Toyota Corolla is a well-known Japanese vehivle that sells in immense numbers in the U.S. Just remember that you will also be buying tires and it is easier to do this at the same place you buy your wheels.4. Loosen the lug nuts for the existing wheels. Jack up the Corolla with a floor jack and lower it onto jack stands. Once you hold the cutting edge wheels you can either compass a shop install them on the van or install them yourself.
Instructions
1. Cinch what the lug device of your Corolla, which Testament vary depending on the year. Earlier Corollas used a 4x100-mm lug example while following versions used a 5x100-mm lug figure.
2. Decide what turn immensity you thirst to upgrade to. It is relatively straightforward to install wheels that are larger in calibre nevertheless the identical broadness or slightly wider than the stock wheels in that all you demand to close is install lower profile tires. Nevertheless, installing significantly wider wheels may doer interference between the wheels and the automobile. It is safer to activity with a spin that is onliest a slender wider, convey by one or two inches.
3. Acquire your wheels and tires. By reason of you are going to be replacing the wheels with larger wheels, you will also need to buy new tires extremely. You can buy wheel and tire packages from online vendors such as the Tire Rack (see Resources) that can sell you a complete package that is ready to bolt on. You can also go to a native store like Discount Tires or even Sears or an auto parts store to see a selection of wheels in person. One bourgeois upgrade fictional to Corollas by their owners is the installation of larger wheels and tires. This can obtain many benefits, including a exceptional appearance, upgraded performance from the wider tires and much an enlargement in rate. Replacing a Corolla's inventory wheels with larger wheels is straightforward.
You can either change each wheel one at a time by jacking the car up and then lowering it back to the ground, or you can lift the car at all four corners. Finish removing the lug nuts and the wheel (or wheels).
5. Slide the new wheel onto the hub. Thread in the lug nuts and tighten them with the lug wrench. Repeat the process for the remaining corners of the car. Once all of the wheels are installed, lower the car back to the ground. Tighten the lug nuts with a torque wrench to 76 lb/ft. Recheck the lug nut torque after the Corolla has been driven for about 100 miles.
