The alternator manage band turns a figure of other components
On some engine types of the Dodge Company, the engine uses one serpentine drive belt to turn the alternator and one or two other components and a moment to turn the others. Other models may bag a unmarried cummerbund for every Element. In any situation, you demand to copper the guide band whether it is stained frayed, cracked, spread out or otherwise damaged. Take the old drive belt with you to the auto parts store so you can use it to help get the correct length, width and design for the replacement belt.4. Install the replacement drive belt onto the pulleys, making sure it runs in the same path as the old one.
Recite the exact way the ride girdle follows across the pulleys and fabricate undeniable you know it or write it down in a diagram.
2. Loosen the drive belt tensioner by loosening its upper locking nut with a wrench, then slip the drive belt off the crankshaft pulley first and remove it from the others.
3. Trial the manage girdle's contingency annually or every 15,000 miles.
Instructions
1.Check and make sure the belt fits properly in each of the ribbed grooves within the pulleys.
5. Adjust the drive belt tensioner until it gives the belt the proper tension and tighten the locking nut. On some engine types. the belt uses a dynamic tensioner that will automatically set and maintain the correct tension.
